Sony RM-TP501 Example: Recording from CD to MD, Touch, 2Touch, PLAYER, Operation, Touch FUNCTION, 1Touch FUNCTION, in this example), Other operations

Example: Recording from CD to MD

This section describes how record audio from a CD to an	4 Touch to select the recorder component (MD/DAT
MD as an example of recording audio/video.	in this example).
	When MD/DAT is touched, the REC EDIT operation
Other operations	screen appears.

Recording from an LD to a video deck is basically the same procedure. For details on the buttons used in recording, refer to the operating instructions supplied with the receiver and other components.

1Touch FUNCTION.

The FUNCTION screen appears.

2Touch .

The REC EDIT screen appears.

5 Touching rin RECORDER: MD/DAT, then touch ( in PLAYER: CD.Starts playback from the CD player3Touch to select the player component (CD in this example).

Because CD is not displayed, Use the JOG DIAL or touch $to scroll downward through the list. If you scroll to far, touch 4to scroll back up.

Operation

PLAYERTouching 4 moves list upTouching $ moves list down

When PLAYER is selected, the receiver’s FUNCTION automatically switches to the PLAYER component.

Starts recording on the MD deck.

Recording starts.

The FUNCTION screen returns once the recording finishes.

To stop recording at any time

Although recording stops automatically in the above example, recording can also be stopped at any time by touching pin RECORDER.

To stop the recording procedure at any time

Touch FUNCTION to display the FUNCTION screen. During steps 2 to 3, touching EXIT will also stop the recording procedure.

15