Other setup
pAdjusting the position of the touch panel (LCD)
Adjust the position of the LCD when it shifts from the normal operating position.
1Touch TOUCH PANEL on the SETUP screen.
The TOUCH PANEL ADJUSTMENT screen appears.
2Touch the center of each of the 4 dots.
(For details, see “Touch panel adjustment” on page 6.) “Adjusted” appears in a short while and long beep is emitted.
pSetting the LCD to turn off automatically
The LCD backlight can be set to turn off automatically after operation.
1Touch LCD AUTO OFF on the SETUP screen.
The LCD AUTO OFF screen appears.
2Touch + or – to set the desired turn off time.
The turn off time can be set between 1 and 10 minutes in 1 minute intervals.
3Touch EXIT.
zTo preserve battery life
Select a short turn off time in step 2.
pChanging the function of the SYSTEM/STANDBY button
ALL OFF: Switches power of all Sony AV components off.
ON/OFF: Switches only the receiver on or off.
pSetting the operation sound on or off
A beep can be set to sound or not sound when the touch panel is touched.
Touch ON (sound) or OFF (no sound) in BEEP:ON OFF in the SETUP screen.
pSetting the warning alarm on or off
A warning alarm can be set to sound or not sound when a communication error has occurred.
Touch ON (sound) or OFF (no sound) in ALARM:ON OFF in the SETUP screen.
pReturning settings to their factory preset settings
Use this function to erase all memorized settings and return them to their factory presets.
Please note that once erased, settings can not be returned.
When carrying out this operation, make sure that the receiver’s power is on, and be sure to point the commander’s transmitter/ receiver section toward the display on the receiver.
1Touch ALL CLEAR on the SETUP screen.
2Touch OK.
Operation
21