Sony RM-TP501 Preparing the Commander, Inserting batteries into the commander, Notes, Preparations, Size-AAalkaline batteries, Positive (+) pole side up

Preparing the Commander

Please be sure to carry out the procedures described in “Setting up the commander” on page 6 after inserting the batteries.

Inserting batteries into the commander

Insert the four size-AA (LR6) alkaline batteries (for commander operation) and lithium battery (for preservation of the commander’s internal memory).

1Remove the battery compartment cover.

Push in direction of arrow

2Insert the alkaline batteries.

Size-AA alkaline batteries

]

} ]}}] } ]

Always insert the negative (–) pole side of batteries first.

3Insert the lithium battery.

After wiping the lithium battery thoroughly with a dry cloth, insert it into the compartment with the positive (+) pole side facing up.

Coin shaped lithium battery CR2032

Positive (+) pole side up

4Close the battery compartment cover.

After inserting the batteries, touching the touch panel turns on the light and displays the touch panel (LCD) adjustment screen. Follow the procedure on the next page for touch panel adjustment and initial communication.

Notes

•The LCD lights up when touched.

•VOL+/–, MUTING and SLEEP can be used even when the LCD is not lit.

•Pressing BACK LIGHT/COMMANDER OFF turns the backlight off. Holding it down for about 2 seconds turns the LCD off. To conserve battery power, be sure to regularly turn off the LCD or power when not in use.

•If the commander is not used for approx. 1 minute, the LCD turns off automatically (Auto Off function). The auto off time can be adjusted (see page 21).