Sony RM-TP501 Adjusting the Commander’s Operating Environment, FUNCTION screen setup, Downloading receiver data, CD MEMO:, Operation, Touch SETUP, Touch SETUP, 5Touch EXIT

Adjusting the Commander’s Operating Environment

Operation

FUNCTION screen setup

Up to 11 components can be displayed on the FUNCTION screen. Only connected components will appear on the FUNCTION screen.

1Touch SETUP.

The SETUP screen will appear.

2Touch FUNCTION HOOK UP.

The FUNCTION HOOK UP screen will appear.

3Select the function not to be displayed and touch NO.

To display other items, use the JOG DIAL or touch 4 or $to scroll through the list.

The selected component is set to not appear and the SETUP screen appears.

To display the components set not to display

Touch YES instead of NO is step 3.

zComponents that have been registered (see page 19) are set to “YES” automatically.

Downloading receiver data

Various types of data can be downloaded from the receiver.

When carrying out this operation, make sure that the receiver’s power is on, and be sure to point the commander’s transmitter/ receiver section toward the display on the receiver. Also, operate the commander at a distance of about 1~2 meters from the receiver.

1Touch SETUP.

The SETUP screen will appear.

2Touch DOWNLOAD.

The DOWNLOAD screen will appear.

3Touch to select the data you wish to download and press:

FUNCTION NAME: Names of connected components.

TUNER PRESET NAME: Broadcast station names etc., memorized in receiver.

CD MEMO: CD song titles or disc titles etc., from a Sony CD changer (5/50/200 CD) connected to receiver with CONTROL A1 cable.

Downloading starts, and the progress is displayed. During this time, please leave the commander’s transmitter/receiver section pointed toward the display on the receiver.

When you touch CANCEL, the data downloaded before you touched CANCEL will be saved.

When downloading has finished, the DOWNLOAD screen returns. A long beep sound will be emitted if downloading has been carried out properly.

If a series of short beeps is emitted, please redo the download procedure. If this occurs, make sure the receiver is turned on and that the commander is pointing toward the receiver during operation.

4Repeat step 3 when downloading other data.

5Touch EXIT.

Download finishes and the SETUP screen appears.

20