To control the volume
Press the VOL 2 +/– buttons to control the volume, and the % button to mute. When you select a visual component, the TV’s volume will be controlled, and when you select an audio component, the amplifier’s volume will be controlled. You can change this setting also (page 30).
Notes
•If you have programmed any signal for the 2 or % button for any component using the learning function, that signal will be transmitted instead of controlling the volume of the TV or amplifier.
•If you have programmed any signal for the 2 or % button of TV or AMP using the learning function, that signal will be also transmitted when you select another component. However, if you have programmed any signal for the 2 or % button of another component, that signal will be transmitted only after you select that component.
•If you have assigned another component to the TV or AMP button, the volume of the TV or amplifier cannot be controlled even when you select other components.
Using Non-Preset
Remote Control
Operations
—Learning Function
To operate
Note
Some specific remote control signals may not be learned.
COMPO |
|
SYSTEM | 3 |
TIMER | |
SCROLL | 4 |
SET
2,8
REC
VIDEO1 VIDEO2AUX
TUNERCDTAPE
MDTVPHONO
1- | DVD | 2- |
MENU |
| GUIDE |
PROGR
Continued
23