Sony RM-VL1000T Programming a series of commands for the component labels

Executing a Series of Commands

—System Control Functions (continued)

5Select the macro number of which System Control function you want to erase by pressing the Label Select button.

SYSTEM

SET

CLEAR

SONY OFF

SYSTEM2

SYSTEM3

SYSTEM4

While erasing

SYSTEM

SET

CLEAR

COMPLETE

R R R

R R R

R R R

SYSTEM2

When erasing finishes,

“COMPLETE” is displayed with a beep sound.

If you want to erase the settings of other macro numbers

Repeat Step 5.

6Press the SET button.

The display returns to the previous one.

Programming a series of commands for the component labels

You can also programme a series of operating commands (component macro) for the component labels (up to 32 steps). To execute a series of operating commands for a component label, proceed as follows.

1When the display for component operation appears (if not, press the SET button repeatedly), press the COMPO button.

2Select the component label by pressing the Label Select button for more than a second.

Notes

•The programmed commands are executed when you select a component label by pressing the Label Select button for more than a second.

When you press the Label Select button for less than a second, the selected label works as the normal component label, and the corresponding function labels are displayed.

•The component macro executing time is variable by changing the setting (page 43).

•See also “About the interval between operation steps” on page 37 and “Notes on System Control Operations” on page 38.

40