Additional Information
Precautions
•Do not drop the unit or subject the unit to shock as malfunction may result.
•Do not leave the unit in a location near heat sources, or in a place subject to direct sunlight, excessive dust or sand, moisture, rain or mechanical shock.
•Do not put foreign objects into the unit. Should any liquid or solid object fall into the unit, have it checked by qualified personnel before operating the unit any further.
•Do not expose the remote control detectors of your components to direct sunlight or other strong illumination. Too much light in such places can interfere with remote control operations.
•Be sure to place the Commander out of the reach of small children or pets. Components such as air conditioners, heaters, electric appliances, and electric shutters or curtains receiving an infrared signal can be dangerous if misused.
Maintenance
Clean the surface with a soft cloth slightly moistened with water or a mild detergent solution. Do not use any type of solvent such as alcohol, benzine or thinner as it may damage the finish of the surface.
Specifications
Operating distance
Approx. 32.8 ft. (10 meters) (varies depending on components of different manufacturers)
Power requirements
Remote control and backlight: Two size AA (R6) batteries
Battery life
Approx. 5 months (varies depending on frequency of use)
Dimensions
Approx. 2 3/4 ⋅ 8 5/8 ⋅ 1 3/16 in. (w ⋅ h ⋅ d)
(69 ⋅ 217 ⋅ 30 mm)
Mass
5.3 oz. (154 g) (not including batteries)
Learnable signals*
Capacity per signal: up to 300 bit
Signal frequency range: up to 156 kHz
Signal interval: up to 1 second
*Some signals cannot be learned by the Commander, even though the signals comply with these specifications.
Design and specifications are subject to change without notice.
The CE mark on the unit is valid only for products marketed in the European Union.
70