Installation Procedure on HP Systems
Test equipment:
The following procedure was confirmed with the following system and drive combination:
UNIX Workstation: | HP9000/712 |
OS: | |
Target: |
Installation:
1)Connection
-Connect MO drive and UNIX Workstation using proper SCSI cable.
-Set proper SCSI ID on the MO drive. (In this case, SCSI ID = 4)
-Set proper termination.
Note: The ‘ioscan’ command is useful to scan SCSI bus.
# ioscan -fc disk [enter]
2)Login
-Turn on the MO drive and the host computer, and insert a cartridge into the drive.
-Login as root.
-Confirm the connection of MO drive and UNIX Workstation using following command.
# diskinfo –v /dev /rdisk/c201d4s0 [Enter]
SCSI describe of /dev/rdsk/c201d4s0 *[4.1GB(4.8GB, 5.2GB)]
Vendor | : SONY |
product id | : |
type | : optical memory |
size | : 1986976 Kbytes (2319786, 2526944) |
bytes per sector | : 512(1024, 2048) |
rev level | : 1.08 |
blocks per disk | : 3973952 (2319786, 1263472) |
ISO version | : 0 |
ECMA version | : 0 |
ANSI version | : 2 |
removable media : yes | |
response format | : 2 |
If the workstation return an error “diskinfo : can’t open /dev/rdsk/c201d1s0”, MO drive is not connected with UNIX workstation correctly. You should shut down the system and check the SCSI cable and SCSI terminator.
15
