Installation Procedure on SantaCruzOperation Systems
Test equipment:
The following procedure was confirmed with the following system and drive combination:
Host: | |
OS: | UnixWare 2.1, UnixWare 7 |
Target: |
Installation:
1)Hardware Installation
-Attach the drive to the system using a SCSI cable.
-Set proper SCSI ID and termination.
-Set proper Functional Switch.
Note: Device type; Direct Memory Access Device Placing a jumper socket over the desired pair of pins A10/B10 turn "Direct Memory Access Device" function ON. (Please refer to Page
-Turn on the drive and insert the media.
2)Turn on the power of the host system
3)To use "diskadd" command to mount the disk on the system
Note: The "diskadd" command is the type of conversation command. So it asks you some questions of to need the information under operation. Please refer to the online manual of UNIX_SCO on detail.
4) To unmount disk on the system
Note: It needs to operate the "unmount " before the eject of MO media.
18
