20GB
If the program does not start
automatically, double-click on
“NS_Setup.exe” on the CD-ROM.
4Perform setup, following step 1

to 4 of the on-screen

instructions.

When setup is completed, press the “Play
test sound” button to confirm operation of
the speaker by playing the test sound.
Notes
•Before starting this procedure, be aw are that your
Wi-Fi network will not be protected until the
setting is complete. After the setting is com plete,
your Wi-Fi network will be protected again when
you set wireless LAN security.
•The following procedure mu st be completed within
30 minutes. If you cannot complete it, turn off the
unit and start over from step 1.
1Have your wireless network

name (SSID) and Security Key

(if applicable) available for

reference.

Refer to the operating instructions of the
wireless LAN router/access point.
2Turn the unit on.
Check that the ?/1 (ON/Standby)
indicator changes from flashing in green
to lit in green.
Notes
•If you have set this already with any of
“Option 1” to “Option 4,” setup may not be
performed completely. Be sure to perform
all-reset for the unit. Press and hold the ALL
RESET button until all indicators light
(page14).
•Do not connect the network (LAN) cable.
3Download the “NS Setup”

application and launch it.

You can download the free application
from “Google Play” for Android devices
or “App Store” for iPhone/iPod touch/
iPad on the website.
You can search the application easily if
you type “NS Setup” into the search
screen.
When setting up with an iPhone/
iPod touch/iPad
Go to [Settings] - [Wi-Fi] and select
“Sony_Wireless_Audio_Setup”.
If “Sony_Wireless_Audio_Setup” does
not appear, wait until the speaker finishes
turning on.

Option 2: Method for using an

application for smartphones or

Tablets (Android device/iPhone/

iPod touch/iPad)

CD-ROM
SSID (Wireless Network Name)
Security Key (WEP or WPA key)