21GB
Network Connections
4Perform setup, following the
on-screen instructions.
When setup is completed, press the “Play
test sound” button to confirm operation of
the speaker by playing the test sound.
Note
Before starting this procedure, be aware that your
Wi-Fi network will not be protected until the setting
is complete. After the setting is complete, you r
Wi-Fi network will be protected again when you set
a wireless LAN security.
1Have your wireless network
name (SSID) and Security Key
(if applicable) available for
reference.
Refer to the operating instructions of the
wireless LAN router/access point.
2Turn the unit on.
3Press and hold the ALL RESET
button on the bottom of the unit
with a thin object such as a
small pin until the ?/1 indicator
starts flashing.
4Check that the ?/1 (ON/
Standby) indicator changes
from flashing in green to lit in
green.
5Connect the unit and a Mac or
PC.
For Mac OS X
Turn on Mac.
Click icon on the top of the screen.
Turn on the Wi-Fi or AirPort. Then select
[Open Network Preferences...].
Select [Sony_Wireless_Audio_Setup]
from the network list.
For Windows 7
Turn on PC.
Click icon on the bottom of the
screen.
Select [Sony_Wireless_Audio_Setup]
from the network list.
For Windows Vista
Turn on PC.
Click icon on the bottom of the
screen.
Click [Connect to a network].
Select [Sony_Wireless_Audio_Setup]
from the network list.
6Access the [Sony Network
Device Setting] screen.
For Mac
Start Safari and select [Bonjour] under
[Bookmarks], then select [SA-NS510].
For PC
Start the browser and input either of the
following URLs into the browser’s
address bar.

Option 3: Manual setting

method using an Access Point

Scan (for PC/Mac)

SSID (Wireless Network Name)
Security Key (WEP or WPA key)