22GB
7Select the desired language
when the [Language Setup]
screen appears.
8Select [Network Settings] from
the menu.
9Select the SSID of the wireless
LAN router/access point, then
input the Security Key (if
applicable).
10Select [Apply].
11Click [OK] in the displayed
window.
The unit restarts automatically, then the
LINK indicator lights up green when the
connection is established.
12Reconnect the Mac or PC to
your network.
Note
This procedure needs to be completed with in 30
minutes. If you cannot complete, start over from
step3.
1Check whether the network
(LAN) cable (not supplied) is
disconnected.
Disconnect the network (LAN) cable
while the AC power is disconnected if the
network (LAN) cable is connected.
2Turn the unit on.
You can operate this unit when the ?/1
(ON/Standby) indicator lights up in green
and the illumination indicator lights up. It
may take a while.
Note
Make sure the AUDIO IN indicator is not lit.
3Press the WPS button on the
access point.
*The position and the shape of the WPS button
are different depending on the model of the
access point.
Tip
Refer to the operating instructions of your
wireless LAN router/access point for details on
the WPS button.
4Press the WPS button on the
unit for three seconds.
The LINK indicator lights up in green
when the connection is made.
Network Settings
SSID

Option 4: Method for using a

WPS push button at the access

point supporting WPS

WPS button*