Operating Other Sony
Components
You can use the supplied remote to operate Son),
components, including TV set, VCRs, DVD players, LD
players, and CD players.
Press VIDEO and | To select | ||
MENU | VTR | 1 | (Beta) |
^ (upward cursor button) | VTR | 2 | (8 mm) |
ENTER/EXECUTE | VTR 3 | (VHS) |
Press CD and | To select |
< (leftward cursor button) | CD (player) |
SYSTEM CONTROL--
I/@
-- Function button
v | (downward | cursor button) | LD | (player) | |
MENU |
| VTR | l | (Beta) | |
h | (upward | cursor button) | VTR 2 | (8 ram) |
0®0
Operation button-
Lc2] _ r=] c5_ c2_ CSD
ic: c:Di
iC:D C22_
Before using the remote for your Sony
component
Table below shows the components that supports the remote.
Function button | Selectable component(s) |
TV | TV (set) |
"v'IDEO | VTR 1 (Beta deck). VTR l |
| (8 mm deck), VTR 3 (VHS deck) |
DVD | DVD (player) |
CD | CD (player), LD (player), VTR 1 (Beta |
| deck), VTR 2 (8 mrn deck), VTR 3 |
| (VHS deck) |
The TV button selects only the TV set and the DVD button only the DVD player.
Use the VIDEO and CD buttons to select any of your
Sony components. The VIDEO button is
To reassign these buttons, press the VIDEO or CD button at the same time you press the button indicated in the table below.
ENTER/EXECUTE | VTR 3 (VHS) |
To restore all settings to their factory-settings
Press both I/_ buttons on top of the remote together with the MASTER VOL
All parameters saved in the remote are cleared and restored to their factory settings.
Operating other Sony components
Do the procedure below to operate other Sony
components that you may own.
1Press the function button on the remote of the component to be used (TV, VIDEO, DVD, or CD).
The component that you selected is activated.
2Operate the components with the operation buttons.
Each operation button on the remote corresponds to a basic operation on the Sony component.
For details on how to use each operation button, refer
to the Operating Instructions of the respective Sony component.
"_" When you press an operation button
The function button of the respective component (TV, VIDEO, DVD or CD) flashes to let you know what is being operated. If you press an operation button that has no corresponding operation on the Sony component being used, none of the function buttons will flash.
Turning off other Sony components
1 Press the function button of the Sony component you want to turn off.
2 Press SYSTEM CONTROL I/_9.
The selected component enters standby mode.
14