the remote).
The disc tray turns and other two disc compartments appear.
4 Replace discs in the compartments with new ones.
5 Press EX-CHANGE on the player. The disc tray closes.
Note
Do not push the disc tray to close it in Step 5, as you may damage the player.
While the disc tray is open by pressing EX- CHANGE on the player
• If the play of the current disc ends, the player stops playing. If the disc is played in 1DISC Repeat Play mode (page 14), the current disc starts playing again.
• In ALL DISCS Shuffle Play mode (page 15), tracks are reshuffled on the current disc.
• In Program Play mode (page 15), only the tracks on the current disc are played.
Press DISC SKIP (or DISC SKIP +/– on
3
Replace discs in the compartments with new ones.
The player plays the disc on the left side compartment after the current disc, and then the one on the right side compartment.
2
Press EX-CHANGE on the player. The disc tray opens and two disc compartments appear. Even if the player is playing a disc, it does not stop playing.
1
Replacing Discs While Playing a Disc
— Ex-Change
You can open the disc tray while playing a disc so that you can check what discs are to be played next and replace discs without interrupting play of the current disc.

Turning off the information in the display

Press DISPLAY MODE on the remote.

Each time you press the button while playing a disc, the display turns off and on alternately. Even when the display is turned off, it will turn on when certain buttons are pressed, and then turn off again after a few seconds.

Before you start playing, when you press the button to turn off the display, “DISP OFF” appears, and when you press the button to turn on the display, “DISP ON” appears.

Displaying the information of a TEXT disc in other languages

You can change the displayed language if the TEXT disc has multi language capacity. When the player detects such a TEXT disc, “MULTI- TEXT” appears in the display. Change the language according to the procedures below.

1 Press MENU on the player.

2 Turn l AMS L (or press ./> on the remote repeatedly) until “LANGUAGE” appears in the display.

3 Press l AMS L (or ENTER on the remote).

The current selected language (ENGLISH, FRENCH, GERMAN, etc.) flashes.

If the player cannot display the language used in a TEXT disc, “OTHER LANG” appears in the display.

4 Turn l AMS L (or press ./> on the remote repeatedly) until the desired language appears in the display.

5 Press l AMS L (or ENTER on the remote).

After a few seconds, the information appears in the selected language.

Discs Playing

13US