Sony SCD-C2000ES Selecting the playback layer, Selecting the playback area, Basic operations during play, To select the default playback layer, 10US

7 Press N.

Playback starts from the first track. If you want to start playing from a specific track, turn l AMS L (or press ./> on the remote repeatedly) to select the track number before pressing N.

8 Adjust the volume on the amplifier.

Basic operations during play

To	Do the following:
Stop play	Press x.
Pause play	Press X.
Resume play	Press X or N.
after pausing
Select a track	Turn l AMS L (or press
	./> on the remote
	repeatedly).
Select a disc	Press DISC SKIP (or DISC SKIP
	+/– on the remote) repeatedly.

Selecting the playback layer

When playing a hybrid disc with an SA-CD layer and a CD layer (page 5), you can select the layer you want to listen to. Also, since both layers are on one side, it is not necessary to turn the disc over. The factory setting is “SEL SA– CD” (SA-CD layer).

Press SA-CD/CD to select the desired playback layer.

To select the default playback layer

1 Press MENU on the player.

2 Turn l AMS L (or press ./> on the remote repeatedly) until “LAYER SEL” appears in the display.

3 Press l AMS L (or ENTER on the remote).

Select a disc directly

Press DISC 1-5 on the player. When using the remote, follow the procedure below.

1Press DISC.

2Press the corresponding numeric button for the disc.

3Press ENTER.

The current default layer appears.

4 Turn l AMS L (or press ./> on the remote) to select the desired playback layer.

5 Press l AMS L (or ENTER on the

Eject a disc	Press A OPEN/CLOSE on the
	player.

Note

During playback, increase the volume level gradually starting from the lowest level. The output from this player may contain band width that is out of the normal listening range. This may cause damage to the speakers or ears.

To locate a track directly by entering the track number

Press the numeric button(s) on the remote to enter the track number.

To enter a track number 11 or over

1Press >10 on the remote.

2Enter the corresponding digits.

To enter 0, press 10/0 on the remote instead.

Example:

To play track number 30, press >10, then 3 and 10/0. To play track number 100, press >10 twice, then 1, and 10/0 twice.

remote).

Selecting the playback area

When playing a disc with the 2 channel playback area and the multi-channel playback area (page 5), you can select the playback area you want to listen to.

Press MULTI/2CH to select the desired playback area.

To select the default playback area

1 Press MENU on the player.

2 Turn l AMS L (or press ./> on the remote repeatedly) until “M/2ch SEL” appears in the display.

3 Press l AMS L (or ENTER on the remote).

The current default area appears.

10US