When using another Sony CD player in conjunction with this player
You can set the supplied remote to be effective on this player only by changing the command mode of the remote.
To set the command mode of the remote
•If the other player’s command mode can be set:
Set the CD1/2 switch of this player’s remote to CD1 (factory setting), and set the other player’s remote to CD2.
•If the other player’s command mode cannot be set:
Set the CD1/2 switch of this player’s remote to CD2.
To set the command mode of this player
1
2 Turn l AMS L (or press ./> on the remote repeatedly) to select “CD1/2 SEL”.
3 Press l AMS L (or ENTER on the remote).
The current command mode appears.
4 Turn l AMS L (or press ./> on the remote) to select “CD – 1” or “CD – 2”, then press l AMS L (or
ENTER on the remote).
Playing Discs
Playing a Disc
The operations for normal play and the basic | Playing | ||
| |||
operations during play are explained below. |
| ||
1 | Turn on the amplifier. Turn down the | Discs | |
2 | volume level to the lowest. | ||
| |||
Select the player position using the |
| ||
3 | input selector on the amplifier. |
| |
Press POWER on the player to turn on |
| ||
4 | the player. |
| |
Press A OPEN/CLOSE on the player to |
| ||
| open the disc tray, and place a disc on |
| |
| the tray. |
| |
With the label side up | Disc number |
5 To place other discs, press DISC SKIP (or DISC SKIP +/– on the remote) repeatedly and place the discs in the order you want to play.
Each time you press the button, the disc tray turns and you can place the discs in the empty disc compartments. The player plays the disc in front of you first.
6 Press PLAY MODE (or CONTINUE on the remote) repeatedly to select ALL DISCS or 1DISC Continuous Play mode.
Each time you press CONTINUE on the remote, “ALL DISCS” or “1 DISC” appears in the display.
When you select | The player plays |
ALL DISCS | All discs in the player |
| consecutively in the order |
| of disc number |
|
|
1DISC | Only the disc you have |
| selected |
|
|
| continued |
9US