4 Turn l AMS L (or press ./> on the remote) to select the desired playback area.

5 Press l AMS L (or ENTER on the remote).

Note

The multi-channel playback area is automatically selected whenever you start playback because “SEL– Mch” (multi-channel playback area) is the factory setting. Select “SEL– 2ch” (2 channel playback area) when the ANALOG 2CH OUT jacks are connected. If you do not, only the signal to the front speakers will be output.

Using the Display

The display window shows various information about the disc or track being played. This section describes the current disc information and information that appears for each play status.

Disc information when a disc is loaded

The display shows the current disc number, total number of tracks and total playing time.

A B C

Discs Playing

F E D

A: Total number of tracks

B: Hybrid disc

C: Currently selected disc and number of playable channels

D: Track 16 and above (for discs with 16 or more tracks)

E: Total playing time

F: Current disc number

Notes on the disc number indications

•The red circle around a disc number indicates the disc is ready to be played.

•A semi-circle around the disc number indicates a disc with tracks to be played. In Program Play mode, the semi-circle indicates a disc with programed tracks.

•The disc number disappears when no disc is detected in the disc component.

continued

11US