Replacing Discs While Playing a Disc
You can open the disc tray while playing a disc so that you can check what discs are to be played next and replace discs without interrupting play of the current disc.
DISC SKIP
1Press
The disc tray opens and two disc compartments appear. Even if the player is playing a disc, it doesn’t stop playing.
2Replace discs in the compartments with new ones.
The player plays the disc on the left side compartment after the current disc, and then the one on the right side compartment.
3Press DISC SKIP.
The disc tray turns and other two disc compartments appear.
4Replace discs in the compartments with new ones.
5Press
The disc tray closes.
Note
Do not push the disc tray to close it in Step 5, as you may damage the player.
While the disc tray is open by pressing the
•If the play of the current disc ends, the player stops playing. If the disc is played in 1 DISC Repeat Play mode (see page 17), the current disc starts playing again.
•In ALL DISCS Shuffle Play mode (see page 18), tracks are reshuffled on the current disc.
•In Program Play mode (see page 19), only the tracks on the current disc are played.
Locating a Specific Disc
You can locate any disc before or while playing a disc.
DISC | DISC SKIP | ||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
DISC 
Number 
buttons
>10
DISC SKIP +/–
To locate | Press | |
|
| |
The next disc | DISC SKIP while playing a disc | |
|
| |
The next or succeeding | DISC SKIP + repeatedly until you | |
discs | find the disc | |
|
| |
The current or preceding | DISC SKIP – repeatedly until you | |
discs | find the disc | |
|
| |
A specific disc directly | DISC | |
| When using the remote, follow the | |
| procedure below. | |
| 1 | Press DISC. |
| 2 | Press the number button of the |
|
| disc. |
| 3 | Press ENTER. |
|
|
|
Discs Playing