Sony SCD-C333ES 16GB, in a Track Z, Locating a Specific Track, Locating a Particular Point, (Time Search), sound (Search), track number Z, indication (High-SpeedSearch)

Playing

Locating a Specific Track	Locating a Particular Point
	in a Track Z
During stop or play mode, you can locate any track to be	You can locate a particular point in a track during play or
played.	play pause.
lAMSL	lAMSL
Number	H
buttons
	./>
>10	m/M
>10

./>

Discs

To locate	You need to

The next or	Turn lAMS Lclockwise until
succeeding tracks	you find the track. When using the
	remote, press >repeatedly until
	you find the track.

The current or	Turn lAMS L
preceding tracks	counterclockwise until you find the
	track. When using the remote, press
	.repeatedly until you find the
	track.

Locating a point while monitoring thesound (Search)

Press and hold m/Mduring play.

You will hear intermittent playback as the disc goes forward or reverses.

When you reach the desired point, release the button.

Locating a point by observing the timeindication (High-Speed Search)

A specific track directly	Turn lAMS Luntil you find	Press m/Mduring play pause.
A specific track directly	Turn lAMS Luntil you find	You will not hear the playback sound.
	the track number you want. When	You will not hear the playback sound.
	using the remote, press .or >	z When “Over!!” appears in the display
	repeatedly until you find the track.	z When “Over!!” appears in the display
		The disc has reached its end. Press .or mto go back.
		The disc has reached its end. Press .or mto go back.

Locating a track directly by entering thetrack number Z

Press the number button(s) to enter the track number.

zTo enter a track number over 11 Z

1Press >10.

2Enter the corresponding digits.

To enter 0, press 10/0 instead.

Examples:

•To play track number 30, press >10, then 3 and 10/0.

•To play track number 100, press >10 twice, then 1, and 10/0 twice.

Note

Tracks that are only a few seconds long may be too short for monitoring. In this case, the player may not search correctly.

Locating a point by setting the start time(Time Search)

1.Turn lAMS Lor press ./>to select the desired track in stop mode.

2.Press m/Mto set the time to start play while looking at the display.

You can set the time from the beginning of the desired a track when you press Mat first, and set the time from the end of the desired track backward’s when you press mat first.

	ALL DISCS	1	2	3	4	5
		1	2	3	4	5		S A C D
								S A C D
DISC	TRACK			MIN		SEC
							1	2	3	4	5
1	5			2 . 5 7			6	7	8	9	10
1	5			2 . 5 7

3.Press H.

Play will start at the time search.