Tip
The program remains even after Program Play ends. Press H to play from the beginning of the program again. The program remains even if you stop play.
Notes
•If you turn off the player, disconnect the power cord, press A on the player, or switch the playback layer or area, the program will be erased.
•If you switch the playback layer or area during Program Play, a single track only will be played back from its beginning, and then the program will be erased.
Checking the contents of the program
Before you start playing or while the player is playing, press CHECK on the remote repeatedly.
Each time you press the button, the track numbers will appear on the display in the programed order.
If you press CHECK on the remote while the player is playing, the programed track numbers will appear starting with the currently playing program step.
Changing the contents of the program
You can change the contents of the program in stop mode.
To | Do the following: |
Erase a track | 1 Press CHECK on the remote |
| repeatedly until the track |
| number you want to erase |
| appears. |
| 2 Press CLEAR on the remote. |
|
|
Erase from the | Press CLEAR on the remote. |
last track in the | Each time you press the button, the |
program | last track of the program is erased. |
|
|
Add a track to the | Perform Steps 2 through 3. |
end of the |
|
program |
|
|
|
Erase all tracks | Hold down x on the player (for |
| about 2 seconds) until “PGM |
| CLEAR” appears on the display. |
|
|
Enjoying a Multi-channel Super Audio CD
— | Playing | ||
function |
| ||
|
| ||
This player is equipped with a |
| ||
management function that sets the playback | Discs | ||
mode of the Super Audio CD by the | |||
| |||
(built into the player) according to the layout or |
| ||
size of your speaker. |
|
| |
Front speakers |
|
| |
L | R |
| |
Center speaker |
| ||
Sub woofer |
|
| |
L | R |
|
Surround speakers
To set the
Notes
•This features only work when you play the Super Audio CD.
•You may not be able to adjust the output level balance depending on the speaker layout mode that you selected.
continued