An “L” speaker is a speaker that can reproduce bass frequencies plentifully. If the surround speakers are “S” speakers, the bass frequencies will come from the front speakers and/or sub woofer.
For normal use, select “Mch DIRECT” or set all the speakers to “L” (ex. “5– LARGE+SW”,
5 Press . AMS >.
To return to the normal display, press MENU on the player.
Notes
•The
•The front speaker setting is set to “L” automatically when you set the playback mode so that the sub woofer is set to
•When you play a track that does not contain the LFE* signal, the signal for the sub woofer does not output. Therefore, when you select “Mch DIRECT”, “5– LARGE+SW”, or
*Low Frequency Enhancement (described as “.1 CH”)
•If you select a playback mode other than “2ch DIRECT” or “Mch DIRECT” using the Multi- channel management function, the sound distribution to the speakers will change, possibly causing a decrease in overall sound volume. If this occurs, adjust the volume with the volume control on the connected amplifier.
•If you change the playback mode while the player is in
•This function cannot be used during CD playback.
Adjusting the output level balance of each speaker
You can adjust the following items in the case of |
| |
| ||
Playing | ||
front speakers (FRONT L/R) and the surround | ||
SURR BAL |
| |
The relative output level balance between the | Discs | |
speakers (SURR L/R) | ||
| ||
CNTR BAL |
| |
The relative output level balance between the |
| |
front speakers (FRONT L/R) and the center |
| |
speaker (CENTER) |
| |
SW BAL |
| |
The relative output level balance between the |
| |
front speakers (FRONT L/R) and the sub woofer |
| |
(SUB WOOFER) |
|
Notes
•Some adjustment may not work depending on the
•You cannot adjust the speaker level when “Mch DIRECT” is selected.
To adjust the output level balance on the front panel of the player
You can adjust the output level balance of each speaker while listening during playback. You can also adjust it while listening to the test tone during stop mode.
1 Press MENU.2 Turn . AMS > until “LEVEL ADJ” appears on the display.
3 Press . AMS >.
During playback, go to Step 6.
4 Turn . AMS > until “TONE ON” appears on the display.
5 Press . AMS >.
The test tone issues from the speakers in sequence with the speaker type appearing on the display.
continued