You can connect the console directly to a broadband network using a network cable. Refer to the instructions supplied with the network device for details.
Setup configurations will vary depending on the type of Internet service in use. Additional network equipment (sold separately) may be required depending on the network setup. Refer to your Internet service provider or instructions supplied with the network equipment for details. For additional information, contact SCEA Consumer Services at
Console rear
Commercially available network cable
2 Insert the connector on the network cable to the network device.The connection method will vary depending on the network device. Refer to the instructions supplied with the network device for details.
Warning
Do not connect network cables or telephone cords of the following types to the network connector. If you connect the wrong type of cable, too much electrical current may pass through the connector, causing a malfunction, excessive heat or fire in the connector:
-Network cables not appropriate for use with a
-Standard residential telephone lines
-Any ISDN (digital) compatible phone or data line
-PBX phone lines
-Other "unknown" types of telephone lines
Creating network configurations
After you have connected the console to a network, you will need to create and save a network configuration. This can be done using the supplied online
Note
Depending on the type of Internet service used, you may need to provide your MAC address. You can find the MAC address for your console listed in the Version Information screen (
page 40).
44Networking