4Press the m/M buttons to select “ADJUST” and press the OK button.

The fine tuning menu for color temperature appears on the screen.

USER A D J U S T MENT

R

 

 

 

1 2 8

G

 

 

 

1 2 8

 

 

 

B

 

1 2 8

 

 

 

1 2 8 0 x 1 0 2 4 / 6 0 H z

E X I T

5Press the m/M buttons to select R (Red) or B (Blue) and press the OK button. Then press the m/M buttons to adjust the color temperature and press the OK button.

Since this adjustment changes the color temperature by increasing or decreasing the R and B components with respect to G (green), the G component is fixed.

6Press the m/M buttons to select , then press theOK button.

The new color setting is stored in memory and automatically recalled whenever “User” is selected.

The COLOR menu appears on the screen.

xAdjusting the SHARPNESS

Adjust to sharpen the edge of images, etc.

1Press the MENU button.

The main menu appears on the screen.

2Press the m/M buttons to select (PICTURE) and press the OK button.

The PICTURE menu appears on the screen.

3Press the m/M buttons to select “ SHARPNESS” and press the OK button.

The “SHARPNESS” menu appears on the screen.

4Press the m/M buttons to adjust the sharpness and press the OK button.xMODE RESET menu (resetting everymode to the default) 0

You can reset the adjustments to the default settings.

1Press the MENU button.

The main menu appears on the screen.

2Press the m/M button to select (PICTURE) and press the OK button.

The PICTURE menu appears on the screen.

3Press the m/M buttons to select “0 MODE RESET” and press the OK button.

The “MODE RESET” menu appears on the screen.

4Press the m/M buttons to select the desired mode and press the OK button.

•OK: To reset every mode in the PICTURE menu to the default settings.

•CANCEL:To cancel resetting and return to the PICTURE menu.

SCREEN menu (analog RGB signal only)

You can adjust the following items using the SCREEN menu.

• AUTO

 

 

 

SCREEN

• PHASE

 

 

 

• PITCH

 

 

AUTO

 

• H CENTER

 

 

PHASE

 

 

 

P I TCH

• V CENTER

 

 

H

CENTER

 

 

 

V

CENTER

 

 

 

1 2 8 0 x 1 0 2 4 / 6 0 H z

 

 

 

 

E X I T

Note

When receiving digital RGB signals from the DVI-D input connector for INPUT1, adjustment is unnecessary.

xAutomatic picture quality adjustment function

When the monitor receives an input signal, it automatically adjusts the picture’s position and sharpness (phase/pitch), and ensures that a clear picture appears on the screen (page 16).

Note

While the automatic picture quality adjustment function is activated, only the 1 (power) switch will operate.

The picture may flicker during this time, but this is not a malfunction. Simply wait a few moments until the adjustment completes.

If the automatic picture quality adjustment function of this monitor seems to not completely adjust the picture

You can make further automatic adjustment of the picture quality for the current input signal (See “AUTO” below).

If you still need to make further adjustments to the picture quality

You can manually adjust the picture’s sharpness (phase/pitch) and position (horizontal/vertical position).

These adjustments are stored in memory and automatically recalled when the monitor receives a previously input and registered input signal.

xMake further automatic adjustments to the picture quality for the current input signal (AUTO)

1Press the MENU button.

The main menu appears on the screen.

2Press the m/M buttons to select (SCREEN) and press the OK button.

The SCREEN menu appears on the screen.

3Press the m/M buttons to select “AUTO” and press the OK button.

Make the appropriate adjustments of the screen’s phase, pitch and horizontal/vertical position for the current input signal and store them.

12