Operation (when recording on this VCR)
Before you start editing
•Turn on your TV and set it to the video channel.
• Press INPUT SELECT or CHANNEL +/– to display “L2” (or “L1”) in the display window.
•Press SP/EP to select the tape speed, SP or EP.
XPAUSE
z REC
1 Insert a source tape with its safety tab removed into the other (playback) VCR. Search for the point to start playback and set it to playback pause.
2 Insert a tape into this (recording) VCR. Search for the point to start recording and press X PAUSE.
3 Press z REC on this VCR to set it to recording pause.
4 To start editing, press the X PAUSE buttons on both VCRs at the same time.
To stop editing
Press the x STOP buttons on both VCRs.
Tip
•To cut out unwanted scenes while editing, press X PAUSE on this VCR when an unwanted scene begins. When it ends, press X PAUSE again to resume recording.
Note
•If you start recording following the procedure above, the VCR won’t start recording with the APC function. To record a tape with the APC function, press z REC again during recording pause in step 3 so that the VCR analyzes the tape. Then, press X PAUSE after the APC indicator stops flashing to start recording. If you press X PAUSE before the APC indicator stops flashing, the APC function is canceled.
Operations Additional
Editing with another VCR 71