Step 3 : Hookups

Selecting the best hookup option

There are many ways in which your VCR can be hooked up. To hook up your VCR so that it works best for you, first scan through the table below. Then use the accompanying diagrams and procedures on the following pages to set up your VCR.

If your TV has audio/video inputs, refer to pages 8 and 9 for audio/video (A/V) hookup. Then follow one of the hookups below.

If you have

Use

Refer to

 

 

 

Antenna only, no cable TV

Hookup 1

Pages 10 to 12

 

 

 

Cable box with many scrambled channels

Hookup 2

Pages 13 to 15

 

 

 

No cable box or cable box with only a few

Hookup 3

Pages 16 to 18

scrambled channels

 

 

 

 

 

Cable box with only a few scrambled

Hookup 4

Pages 19 to 21

channels and you are using an A/B switch

 

 

 

 

 

After you’ve completed the connections, follow the instructions for setup. During setup, if you need more details on the procedure described, page numbers are provided where you can find complete, step-by-step instructions.

After you’ve completed the setup, you’re ready to use your VCR. Procedures differ depending on the hookup you used. For an overview, refer to “Quick reference to using the VCR” on the back cover.

Before you get started

•Turn off the power to all equipment.

•Do not connect the AC power cords until all of the connections are completed.

•Be sure you make connections firmly. Loose connections may cause picture distortion.

•If your TV doesn’t match any of the examples provided, see your nearest Sony dealer or qualified technician.

Started Getting

Hookups 7