Notes

•The clock cannot be set automatically if you do not receive a channel that carries a time signal in your area. If so, set the clock manually (page 23).

•If there are only a few channels in your area that carry time signals, setting the clock automatically may take up to about 20 minutes. If nothing happens even after you wait about 20 minutes, set the clock manually (page 23).

•If you made Hookup 2, make sure you leave the cable box on.

•The clock display appears when VIDEO mode is selected with no tape inserted or when the DVD-VCR is turned off.

Using Manual Clock Set

Before you start…

•

Turn on the DVD-VCR and your TV.

SET UP

• Set the TV to video input so that the signal

 

 

from the player appears on the TV screen.

 

•

Set TV / DVD·VIDEO switch to

 

 

DVD·VIDEO on the remote.

 

• If the DVD player is in play mode, you cannot display the setup menu. Stop the DVD playback.

V/v/B/b

ENTER

Started Getting

1

2

Press SET UP, then press V/v to select (OPTION) and press ENTER.

Press V/v to select “Clock Set/Adjust”, then press ENTER.

The “CLOCK SET/ADJUST” menu appears.

continued

Setting the clock 23US