4

Press B/b to select an item.

 

5

Press SET UP to exit the menu.

 

Menu choices

• Dolby Digital

Selects the type of Dolby Digital signal. The default setting is indicated in bold print.

D-PCM

Select this when the player is connected to an audio component

 

lacking a built-in Dolby Digital decoder.

 

 

Dolby Digital

Select this when the player is connected to an audio component

 

with a built-in Dolby Digital decoder.

 

 

• DTS

Selects whether or not to output DTS signals. The default setting is indicated in bold print.

Off

Select this when the player is connected to an audio component

 

lacking a built-in DTS decoder.

 

 

On

Select this when the player is connected to an audio component

 

with a built-in DTS decoder.

 

 

• Audio DRC (Dynamic Range Control)

Makes the sound clear when the volume is turned down when playing a DVD that conforms to “Audio DRC.” This affects the output from the following jacks:

–LINE OUT AUDIO L/R jacks

–DIGITAL AUDIO OUT (COAXIAL)/HDMI OUT jack only when “Dolby Digital”

is set to “D-PCM”.

The default setting is indicated in bold print.

Standard

Normally select this positon.

 

 

Wide Range

Gives you the feeling of being at alive performance.

 

 

• Audio (HDMI)

Selects the type of audio signal output from the HDMI OUT jack.

Auto

Normally select this position. Outputs audio signals according

 

to the “Dolby Digital” or “DTS” settings (page 60).

 

 

PCM

Converts Dolby Digital or DTS to PCM.

 

 

60US Audio Setup