Manuals / Brands / Portable Media / MP3 Player / Sony / Portable Media / MP3 Player

Sony SLV-D570H Checking/changing/canceling timer settings

1 140

Download 140 pages, 6.46 Mb

Checking/changing/canceling timer settings

Before you start…

•Check that the DVD-VCR clock is set to the correct time.

•Turn on the DVD-VCR and your TV. When using a cable box or a decoder, turn it on.

•Set the TV to video input so that the signal from the player appears on the TV screen.

•Set TV / DVD·VIDEO switch to DVD·VIDEO on the remote.

•Insert a tape with its safety tab in place. Make sure the tape is longer than the total recording time.

•If the DVD player is in play mode, you cannot display the setup menu. Stop the DVD playback.

SELECT VIDEO

CLEAR

TIMER

V/v/B/b

ENTER

O RETURN

Press SELECT VIDEO to control the VCR.

Press TIMER.

The timer programming menu appears.

56US Checking/changing/canceling timer settings

Contents

2-671-543-11 (2) US/ES © 2006 Sony Corporation WARNING CAUTION For customers in the U.S.A Note •To keep the disc clean, handle the disc by its edge. Do not touch the surface Precautions On safety On power sources •Operate the unit only on 120 V AC, 60 Hz On placement Copyright IMPORTANT NOTICE Important Safety Instructions 1Read these instructions 2Keep these instructions Table of contents 10Step 1 : Unpacking 11Step 2 : Setting up the remote commander 14Step 3 : Basic hookups 20Step 4 : Selecting a language DVD Settings and Adjustments 59Audio Setup 62Screen Setup 66Setting the display or sound track language 68Parental Control (limiting playback by children) About this manual “DVD” may be used as a general term for DVD VIDEOs •The meaning of the icons used in this manual is described below: Icon Meaning Functions available for DVD Region code DVDs labeled ALL will also play on this player Example of discs that the player cannot play The player cannot play the following discs: CD-ROMs/CD-Rs/CD-RWs Note on DualDiscs Step 1 : Unpacking Step 2 : Setting up the remote commander Notes •With normal use, the batteries should last about three to six months •Do not use a new battery with an old one •Do not use different types of batteries •Do not leave the remote commander in an extremely hot or humid place Code numbers of controllable TVs TV brand Code number Step 3 : Basic hookups Audio/video (A/V) hookup AUse this hookup if your TV has stereo jacks DVD-VCR Audio cord (not supplied) BUse this hookup if your TV does not have stereo jacks Hookup 1 (Plug and Play) AUse this hookup if you are using: BUse this hookup if you are using a VHF-onlyantenna (you get channels 2–13only) If you cannot connect your antenna cable to the DVD-VCRdirectly Page DVD-VCRsetup (Hookup 1 continued) Plug the DVD-VCRinto an AC outlet to AC outlet AC power cord The DVD-VCRstarts presetting the clock and channels Hookup Use this hookup if you are connecting a cable box with many scrambled channels After you have completed hookup… Step 4 : Selecting a language Step 5 : Setting the clock Page Using Manual Clock Set Turn on the DVD-VCRand your TV • Set the TV to video input so that the signal from the player appears on the TV screen Set TV/ DVD·VIDEOswitch to Press V/v to select “Manual”, then press The day of the week is set automatically Press ENTER to confirm the setting Step 6 : Presetting channels Page Presetting/disabling channels manually Press V/v to select “Channel Add/Delete,” then press ENTER To preset/disable a channel: 1 Press CH +/– or number buttons to enter the channel number Channel to be preset 2 Press B/b to select “ADD” (in memory) or “DELETE” (deleted) Step 7 : Setting up the VCR Plus+® system Page Page S-Video/ComponentVideo/HDMI hookup AUse this hookup if your TV has an S-VIDEOinput jack BUse this hookup if your TV has component video input jacks See page 34 for audio connections CUse this hookup if your TV has an HDMI input jack To connect to a TV with DVI input A/V Receiver hookup AConnecting to audio L/R jacks BConnecting to a digital audio input jack *1 Manufactured under license from Dolby Laboratories “Dolby” and the double-Dsymbol are trademarks of Dolby Laboratories *2 “DTS” and “DTS Digital Out” are trademarks of Digital Theater Systems, Inc Playing discs 37US Locate a point quickly m or M on the remote (or hold down m or M on the unit) the button on the unit): • DVD To playback quickly or slowly with sound (DVD only) To Resume playback for the current disc (Resume Play) 1 While playing a disc, press x STOP to stop playback 2 Press H PLAY Notes on playing DTS* sound tracks on a CD Guide to the on-screendisplay To playback the desired title/track or chapter You can playback the desired title/track or chapter using this menu 3 Press ENTER to start playback 4 Press DISPLAY or O RETURN to turn off the menu To playback from the desired title/track counter position To adjust the playback picture (Custom AV Mode) 1 Press V/v during playback to select the Custom AV Mode icon 2 Press B/b to change the setting Setting Video Setting Playing a tape To resume normal playback To turn off the power while rewinding (Rewind Shut Off) To use the time counter To display the counter on the TV screen, press DISPLAY during normal playback •Adjust the picture using the TRACKING +/– buttons if: –Streaks appear while playing in slow motion –Bands appear at the top or bottom while pausing Adjusting the picture (tracking) Although the VCR automatically adjusts the tracking when playing a tape, distortion may occur if the recording is in poor condition. In this case, manually adjust the tracking Press TRACKING +/– to display the tracking meter. The Recording TV programs To stop recording To check the remaining tape length Maximum Recording Time 49US Recording TV programs using the timer Basic Daily/weekly recording To use the Auto Tape Speed function To watch another TV program after setting the timer To watch a DVD after setting the timer 3 Press H PLAY Recording TV programs using the VCR Plus+® system Page To stop the VCR while recording, press x STOP To use the DVD-VCRafter setting the timer You can also do the following tasks while the VCR is recording: •Reset the counter (page 45) •Display tape information on the TV screen (page 48) Checking/changing/canceling timer settings Press V/v to select setting you want to change or cancel • To cancel the setting, press CLEAR Press O RETURN again to exit the menu When the timer settings overlap Program Locking the DVD-VCR (Child Lock) Audio Setup Menu choices Page Screen Setup Page • YCbCr/RGB Selects the type of HDMI signal output from HDMI OUT jack YCbCr To set the “Progressive” setting 1 Follow step 1 and 2 on page 62, then press V/v to select “Progressive.” 4 If video signal appears OK, video connection is complete. Press ENTER The PROGRESSIVE indicator on the unit lights up in orange PROGRESSIVE indicator If picture is distorted, press O RETURN. Check the connection (page 32) 5 Press SET UP to exit the menu Setting the display or sound track language Press V/v to select the desired language, then press ENTER • DVD MENU LANGUAGE You can select the desired language for the disc’s menu • AUDIO LANGUAGE Switches the language of the sound track Parental Control Press b to set the parental control •If you have not entered a password •When you have already registered a password ” to “ ” screen will not appear To change the password 3 Re-enterthe new password To turn off the Parental Control function Set “Use Password” to “No” in step 3 on page To play a disc for which Parental Control is set Using the DVD’s menu Zooming into a scene Changing the angles Displaying the subtitle Press V/v repeatedly to select “On.” To turn off the subtitles Select “Off” in step Various play mode functions (Program play To stop program play To change or cancel a program To cancel all the programmed numbers Playing in random order (Shuffle play) To return to normal play Playing repeatedly (Repeat play) 2 Press REPEAT during playback 3 Press REPEAT or B/b repeatedly to select the item to be repeated When playing a DVD •Chapter: repeats the current chapter Changing the sound •If you set DTS audio output, you cannot select surround setting (page 82) Changing the sound 81US Virtual surround setting To cancel the setting When the playing signal does not Virtual surround setting 83US Playing an MP3 audio track To stop play To repeat play To go to the next or previous page To return to the previous display To return to the “Select a Media Type” menu To turn off the display Press x STOP twice, then press O RETURN repeatedly To program MP3 audio tracks 1 Press x STOP twice, then press REPEAT 2 Press B/b to select “PROGRAM,” then press ENTER To shuffle MP3 audio tracks About MP3 audio tracks Note on Multi Session/Border discs •The player cannot play audio tracks in MP3PRO format •Depending on the disc contents, playback may take some time to start The Playback order of MP3 audio tracks • Structure of disc contents A t B t D t E t F t G Page Playing JPEG image files To display the selected image To play the Slide show To rotate the selected image To zoom in an image 2 Press B/b to select “ ”, then press ENTER. “ ” appears 3 Press V/v/B/b to move “ ” to the position where you want to zoom in 2⋅ t normal magnification • You cannot use ZOOM on the remote in JPEG image files on DATA CD/DATA DVD About JPEG image files •This player can play JPEG image files with the extension “.JPEG” or “.JPG.” •Progressive and lossless compression JPEG image files are not supported Playing JPEG image files 93US Playing VIDEO CDs with “PBC ON/OFF” Functions Press ENTER Follow the instructions in the menu for interactive operations Refer to the instructions supplied with the disc, as the operating procedure may differ depending on the VIDEO CD To return to the menu Quick Timer Recording Recording stereo and bilingual programs Searching using various functions • Scan and Play (To search using the index function): 1 Press b to scan ahead, or B to scan backwards The VCR searches and then plays back for about five seconds •Go to [0:00:00] (To search for the counter 0:00:00 point): Changing menu options Press B/b to change the setting The default settings are indicated in bold print Menu option Set this option to Tape Length Editing with another VCR Operation (when recording on this VCR) Before you start editing •Turn on the VCR and the TV and set it to the video channel •Press INPUT SELECT to display “L1” or “L2” in the display window General setup information 3CH Setting the RF Output channel 3 Press TV/VIDEO to turn on “VIDEO” in the DVD-VCR’sdisplay window Information Additional Attaching the external antenna connector Attaching a VHF/UHF band mixer Troubleshooting DVD Troubleshooting Picture There is no picture/picture noise • Re-connectthe connecting cord securely • The connecting cords are damaged There is no sound • The connecting cord is damaged • The player is connected to the wrong input jack on the amplifier (receiver) (page 15) • The amplifier (receiver) input is not correctly set Operation The title of the MP3 audio album characters are displayed as asterisks correctly displayed • Program play, shuffle play, or repeat play, has been VCR Troubleshooting Glossary DVD-RW(page 7) DVD+RW (page 7) HDMI (High-DefinitionMultimedia Interface) (pages 32 and 63) Interlace format Progressive format (pages 32 and 64) Specifications Index to parts and controls Display window Rear panel DVD player and VCR DVD player only Remote commander for DVD Remote commander for VIDEO AZ (eject) button (44) CSELECT VIDEO button (11) DNumber buttons* (28) ECLEAR button (45) (51) DVD Audio/Subtitle Language Index Page Índice 3Conexiones básicas 9Selección del idioma 10Ajuste del reloj 11Memorización de canales Conexiones básicas Conexión de audio/video (A/V) AUtilice esta conexión si su televisor tiene tomas estéreo Videograbadora-DVD Televisor Cable de audio/video Conexión 1 (Plug and Play) Page Videograbadora-DVDconfiguración (Conexión 1 continuación) Enchufe la Videograbadora-DVDen la toma de CA a la toma de CA Cable de alimentación de CA La Videograbadora-DVDempezará a preajustar el reloj y memorizar los canales Conexión Selección del idioma Ajuste del reloj 11ES Conexiones avanzadas AUtilice esta conexión si su televisor tiene una toma de entrada de S-VIDEO Consulte la página 12 para conexiones de audio CUtilice esta conexión si su televisor tiene una toma de entrada de HDMI Reproducción de discos Antes de comenzar 1 Pulse SELECT DVD para controlar el reproductor de DVD 2 Pulse Z para abrir la bandeja de discos y poner un disco en ella con la cara de reproducción hacia abajo básicas Operaciones Reproducción de cintas Para reanudar la reproducción normal Para desconectar la alimentación durante el rebobinado (Parada del rebobinado) Grabación de programas de TV