To use the VCR after setting the timer
To use the VCR before a timer recording begins, just press ON/STANDBY. The indicator turns off and the VCR switches on. Remember to press ON/STANDBY to reset the VCR after using the VCR.
You can also do the following tasks while the VCR is recording:
•Reset the counter.
•Display tape information on the TV screen.
•Check the timer settings.
•Watch another TV programme.
Daily/weekly recording
In step 2 above, press . to select the recording pattern. Each time you press
. , the indication changes as shown below. Press > to change the indication in reverse order.
TODAY n
nMO (every Monday) n SU (every Sunday) n 1 month later n (dates count down) n TODAY
Tips
•To set the programme position, you can also use the PROG +/– or programme number buttons.
•To set the tape speed, you can also use the SP/LP button.
•When you are recording a progamme in the SP mode and the remaining tape becomes shorter than the recording time, the tape speed is automatically changed to the LP mode. Note that some interference will appear on the picture at the point the tape speed is changed. If you want to keep the same tape speed, set AUTO TAPE SPEED to OFF in the TAPE OPTIONS menu (page 39).
Note
• The indicator flashes in the display window when you press ON/STANDBY with no tape inserted.
Basic Operations
Operations Basic
33