Sony SLV-E230UY Operation (when recording on this VCR), Editing with another VCR (continued)

Editing with another VCR (continued)

Operation (when recording on this VCR)

Before you start editing

• Turn on your TV and set it to the video channel.

• Press INPUT SELECT to display “L”
in the display window.	P PAUSE r REC

•Press SP/LP to select the tape speed, SP or LP.

1Insert a source tape with its safety tab removed into the other (playback) VCR. Search for the point to start playback and set it to playback pause.

2Insert a tape with its safety tab in place into this (recording) VCR. Search for the point to start recording and press P PAUSE.

3Press r REC on this VCR and set it to recording pause.

4To start editing, press the P PAUSE buttons on both VCRs at the same time.

To stop editing

Press the p STOP buttons on both VCRs.

Tips

•To edit more precisely, press the P PAUSE buttons on the VCRs to release pause.

•To cut out unwanted scenes while editing, press P PAUSE on this VCR when an unwanted scene begins. When it ends, press P PAUSE again to resume recording (Assemble Editing).

Note

•If you start recording following the procedure above, the VCR won’t start recording with the OPC function. To record a tape with the OPC function, press r REC again during recording pause in step 3 so that the VCR analyses the tape. Then, when you start editing in step 4, press P PAUSE after the OPC indicator stops flashing. If you press P PAUSE before the OPC indicator stops flashing, the OPC function is cancelled.

42Additional Operations