Sony SLV-E230UY Connecting the VCR, Additional connection

Step 3

Connecting the VCR

		AERIAL IN
Mains lead		AERIAL OUT
to mains			AERIAL IN
	: Signal flow	Aerial cable (supplied)
1	Disconnect the aerial cable from your TV
	and connect it to AERIAL IN on the rear		IN
	and connect it to AERIAL IN on the rear		ENTREE
	panel of the VCR.		AERIAL
			ANTENNE
			OUT
			SORTIE
2	Connect AERIAL OUT of the VCR and		IN
2	Connect AERIAL OUT of the VCR and		ENTREE
	the aerial input of your TV using the		AERIAL
	supplied aerial cable.		ANTENNE
	supplied aerial cable.		SORTIE
			OUT
3	Connect the mains lead to the mains.

Started Getting

Additional connection

To a TV that has a EURO-AV (Scart) connector

This additional connection improves picture and sound quality. Connect the TV as shown on the right. Whenever you want to watch the VCR picture, press TV/VIDEO to display the VIDEO indicator in the display window.

Note

This VCR	TV

:LINE-1(TV)

EURO-AV (Scart)

VMC-2121 EURO-AV cable (not supplied)

•When you connect the VCR and your TV only with an aerial cable, you have to set RF MODULATOR in the OPTIONS menu to ON (initial setting).

If the TV is connected to the LINE-1(TV) connector, setting RF MODULATOR in the OPTIONS menu to OFF is recommended. In the OFF position, only the signal from the aerial is output through the AERIAL OUT connector (see page 39).

Getting Started 7