Sony SLV-E230UY Tuning your TV to the VCR

Step 5

Tuning your TV to the VCR

If you connect the VCR to your TV using the EURO-AV cable, skip this step.

PROGRAM +/–

RF CHANNEL

1 AUTO SET UP Press RF CHANNEL on the VCR.

The RF channel appears in the display window.

RF CHANNEL

The VCR signal is output through this channel to the TV.

Started Getting

2	Turn on your TV and select a programme position for the VCR
	picture.

This programme position will now be referred to as the video channel.

3	Tune the TV to the same channel as that
	shown in the display window so that
	the picture on the right appears on the
	TV screen.

Refer to your TV manual for tuning instructions.

If the picture does not appear clearly, see “To obtain a clear picture from the VCR” on page 10.

SONY VIDEO CASSETTE RECORDER

4 AUTO SET UP

RF CHANNEL

Press RF CHANNEL.

You have now tuned your TV to the VCR. Whenever you want to play a tape, set the TV to the video channel.

continued

Getting Started 9