Hookup 1 : VCR setup
Plug the VCR into the AC outlet.
The VCR automatically presets the VCR’s clock and TV channels when the VCR is plugged into the AC outlet.
AC power cord
to AC outlet
The VCR starts presetting the clock and channels.
When Auto preset is completed, the current time appears in the display window.
You have now completed VCR setup.
To change the
The clock is set using a time signal provided by some TV channels. If the clock is incorrect, or
To add or disable channels manually, see “Presetting/disabling channels manually” on page 31.
Notes
•If you connect the AC power cord before the antenna connections are completed, the channels may be incorrectly set. If this happens, see “Step 6 : Presetting channels” on page 29.
•Do not press any buttons on the VCR or remote commander during Auto preset.
•Auto preset starts automatically only when you plug in the AC power cord for the first time after you purchase the VCR.
•Auto preset can be performed by pressing x STOP on the VCR continuously for 5 seconds or more with the VCR power turned off.
Started Getting
Hookups 15