Additional Information

Antenna information

Attaching the external antenna connector

When using a 300-ohm twin lead cable for a VHF/UHF antenna, use an antenna connector (not supplied) to connect the antenna to the VCR.

300-ohm twin lead cable

Antenna connector (not supplied)

1 Loosen the screws on the antenna connector.

2 Wind the twin leads around the screws on the antenna connector. 3 Retighten the screws.

Attaching a UHF/VHF band mixer

When using both a 75-ohm coaxial cable and a 300-ohm twin lead cable for a VHF/UHF antenna, use a UHF/VHF band separator/ mixer (not supplied) to connect the antenna to the VCR.

300-ohm twin lead cable

UHF/VHF band separator/ mixer (not supplied)

75-ohm coaxial cable

Information Additional

1 Loosen the screws on the mixer.

2 Wind the twin leads around the screws on the mixer. 3 Retighten the screws.

4 Connect the 75-ohm coaxial cable to the mixer.

Antenna information 73