To cancel the Auto Set Up function
Press MENU.
Notes
•Whenever you operate the Auto Set Up function, some of the settings (ShowView*, timer, etc.) will be reset. If this happens, you have to set them again.
•Auto preset starts automatically only when you plug in the mains lead for the first time after you purchase the VCR.
•If you want to use the Auto Set Up function again, press MENU, then press M/m/ </, to highlight INSTALLATION and press OK. Press M/m to highlight INSTALLATION AUTO, then repeat all procedures from step 3.
•Auto preset can be performed by pressing x (stop) on the VCR continuously for 5 seconds or more with no tape inserted.
* not available on
20Setting up the VCR with the Auto Set Up function