7 | PROG | Press PROG. |
|
The programme position or LIGNE input appears in the display window.
8
PROG
CHOIX ENTREE
Turn 
PROG to set the programme position.
To record from a decoder or other source connected to one or more of the LIGNE inputs, turn 
PROG or press CHOIX ENTREE to display the connected line in the display window.
9 | PROG | Press PROG to complete the setting. |
|
“OK” appears in the display window for about five seconds.
The 
indicator appears in the display window and the VCR stands by for recording.
To record from a decoder or other source, leave the connected equipment switched on.
To return to the previous step
To return to the previous step, press the CHAINE + and – buttons on the VCR at the same time during any of the Dial Timer settings.
To stop recording
To stop the VCR while recording, press x (stop).
To use the VCR after setting the timer
To use the VCR before a recording begins, just press ?/1. The 
indicator turns off and the VCR switches on. Remember to press ?/1 to reset the VCR to recording standby after using the VCR.
You can also do the following tasks while the VCR is recording:
•Reset the counter (page 37).
•Display tape information on the TV screen (page 39).
•Check the timer settings (page 57).
•Watch another TV programme (page 39).
44Recording TV programmes using the Dial Timer