Specifications

System

Channel coverage SECAM (L):

VHF F2 to F10 UHF F21 to F69 CATV B to Q HYPER S21 to S41

PAL (B/G):

VHF E2 to E12

VHF Italian channel A to H UHF E21 to E69

CATV S01 to S05, S1 to S20 HYPER S21 to S41

Aerial out

75-ohm asymmetrical aerial socket Tape speed

SP: PAL 23.39 mm/s (recording/ playback)

NTSC 33.35 mm/s (playback only)

SECAM

23.39mm/s (recording/ playback)

MESECAM

23.39 mm/s (playback only) LP: PAL 11.70 mm/s (recording/

playback)*

NTSC 16.67 mm/s (playback only)

SECAM

11.70mm/s (recording/ playback)

MESECAM

1.70mm/s (playback only)

EP: NTSC 11.12 mm/s (playback only)*

Maximum recording/playback time

10 hrs. in LP mode (with E300 tape) Rewind time

Approx. 1 min. (with E180 tape)

* not available on SLV-SE230B

Inputs and outputs

LIGNE-1 (EURO AV) 21-pin

Video input: pin 20

Audio input: pins 2 and 6

Video output: pin 19

Audio output: pins 1 and 3 LIGNE-2 (DEC/EXT)/LIGNE-3 (DEC/ EXT)

21-pin

Video input: pin 20

Audio input: pins 2 and 6

tLIGNE-2 G o D*1 VIDEO IN, phono jack (1) Input signal: 1 Vp-p, 75 ohms, unbalanced, sync negative AUDIO IN, phono jack (2) Input level: 327 mVrms

Input impedance: more than 47 kilohms

AUDIO (OUT/SORTIE) R/D L/G*2 Phono jack (2)

Rated output level: 327 mVrms

Load impedance: 47 kilohms

Output impedance: less than 10 kilohms

*1 SLV-SE830B only

*2 not available on SLV-SE630B and SE230B

General

Power requirements

220 – 240 V AC, 50 Hz Power consumption

•SLV-SE230B 15 W

1.2W (VEILLE ECO is set to ECO2, minimum)

•SLV-SE630B 17 W

1.2W (VEILLE ECO is set to ECO2, minimum)

•SLV-SE830B, SE730B 17 W

1.3W (VEILLE ECO is set to ECO2, minimum)

76Specifications