Symptom

Remedy

 

 

 

 

 

 

 

 

The picture rolls

• Adjust the vertical hold control on the TV or monitor.

 

 

 

vertically during picture

 

 

 

 

 

search.

 

 

 

 

 

 

 

 

 

 

The picture has no

• The tape is defective.

 

 

Playback

sound.

• If you made A/V connections, check the audio cable

 

 

 

 

connection.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The sound from a tape

Adjust the tracking.

 

 

 

recorded with the VCR is

The video heads are dirty. Clean the video heads using a

 

 

 

not in stereo or the

 

Sony video head cleaning cassette as explained above.

 

 

 

STEREO indicator in the

 

 

 

 

 

display window is

 

 

 

 

 

flashing.

 

 

 

 

 

 

 

 

 

 

 

No TV programme

Make sure the TV is set to the video channel. If you are

 

 

 

appears on the TV

 

using a monitor, set it to video input.

 

 

 

screen.

• Select the correct source with the CHOIX ENTREE button.

 

 

 

 

 

Select a programme position when recording TV

 

 

 

 

 

programmes; select a line input when recording from other

 

 

Recording

 

 

equipment.

 

InformationAdditional

 

 

 

 

TV reception is poor.

• Make sure the aerial cable is connected securely.

 

 

 

 

 

 

• Adjust the TV aerial.

 

 

 

 

Make sure SYS. (L/L’ or B/G) in the RECHERCHE

 

 

 

 

 

MANUELLE menu is set to the same system in your local

 

 

 

 

 

area.

 

 

 

 

 

 

 

 

 

The tape starts playing as

The safety tab has been removed. To record on this tape,

 

 

 

soon as it is inserted.

 

cover the tab hole (see page 40).

 

 

 

 

 

 

 

 

 

The tape is ejected when

The safety tab has been removed. To record on this tape,

 

 

 

you press z ENR.

 

cover the tab hole (see page 40).

 

 

 

 

 

 

 

 

Nothing happens when

• Make sure the tape is not at its end.

 

 

 

you press z ENR.

 

 

 

 

 

 

 

 

 

 

The timer does not

• Check that the clock is set.

 

 

 

operate.

• Make sure a tape has been inserted.

 

 

recording

 

• Check that the safety tab has not been removed.

 

 

 

• Make sure the tape is not at its end.

 

 

 

 

 

 

 

 

• Make sure a programme has been set for timer recording.

 

 

 

 

• Make sure your timer settings are past the current time.

 

 

Timer

 

• Check that the decoder is turned on.

 

 

 

• Check that the satellite tuner is turned on.

 

 

 

 

 

 

 

 

• The clock stops if the VCR is disconnected from the mains

 

 

 

 

 

for more than one hour. Reset the clock and timer.

 

 

 

 

• Turn the power off and unplug the mains lead.

 

 

 

 

 

 

 

 

continued

Troubleshooting 73