Additional Information
Troubleshooting (continued)
Remote commander
S21 | The remote | Make sure you are pointing the remote commander at the |
| commander does not | remote sensor on the VCR. |
| operate. | Replace all the batteries in the remote commander by new ones |
|
| if they are weak. |
|
| Make sure the TV/VIDEO remote control switch is set |
|
| correctly. |
|
| Make sure the COMMAND MODE switch position of the VCR |
|
| matches to the remote commander’s one. |
|
|
|
S22 | You cannot control | Set your TV’s code number. The code number may change |
| your TV. | when you replace the batteries of the remote commander (see |
|
| page 9). |
|
|
|
| Cleaning |
|
|
|
|
S23 | The VCR needs to be | Clean the cabinet, panel and controls with a dry, soft cloth, or a |
| cleaned. | soft cloth slightly moistened with a mild detergent solution. Do |
|
| not use any type of solvent, such as alcohol or benzene. |
|
|
|
| Clock |
|
|
|
|
S24 | The clock has | The clock stops if the VCR is disconnected from the mains for |
| stopped and | more than one hour. Reset the clock and timer if needed (see |
| lights in the display | |
| window. |
|
|
|
|
| Power |
|
|
|
|
S25 | The ?/1 ON/ | Connect the mains lead to the mains securely. |
| STANDBY switch |
|
| does not function. |
|
S26 The power is turned on but the VCR does not operate.
Moisture condensation occurs. Turn the power off, unplug the mains lead and leave the VCR to dry for over three hours.
S27 The tape is ejected | You have set a timer recording, but the tape on which you want |
when you press ?/1 | to record is protected (or contains protected recordings). Unlock |
ON/STANDBY. | the protection or use another tape or replace the safety tab (see |
|
S28 The display is not lit when the VCR is in STANDBY mode.
The VCR is in power save mode. Set the POWER SAVE option to OFF in the OTHER OPTIONS menu (see page 73).
S29 POWER SAVE is set to ON but the display remains lit in STANDBY mode.
The display is always lit if the VCR is in timer standby mode. For more details regarding the energy saving, see page 73.
106Troubleshooting