Getting Started

Step 2 : Setting up the remote commander (continued)

Controlling other TVs with the remote commander

The remote commander is preprogrammed to control non-Sony TVs. If your TV is listed in the table below, set the appropriate manufacturer’s code number.

1 Set TV/VIDEO at the top of the remote commander to TV.

2 Hold down ?/1, and enter your TV’s code number(s) using the programme number buttons.Then release ?/1.

Now you can use the following TV control buttons to control your TV:

?/1, TV/VIDEO, programme number buttons, –/– – (ten’s digit), PROG +/–,

2+/–, a (TV), / (Teletext), FASTEXT buttons, WIDE*, MENU*, CURSOR M*/m*/<*/,*, and OK*.

*These buttons may not work with all TVs.

Tip

•When you set your TV’s code number correctly while the TV is turned on, the TV turns off automatically.

8Setting up the remote commander