SmartFile function
Registering the contents of a recorded tape in the SmartFile label
The VCR will register programmes recorded on a tape (even a
SmartFile label by detecting the index | g |
| |
signals indicating the start of recorded |
|
programmes. You can register up to the 12th |
|
programme from the start of the tape. The |
|
programmes appear from the bottom of the | SMARTFILE GENERATOR |
screen as PROGRAM NO. 1, PROGRAM |
|
NO.2, ... PROGRAM NO.12 in the order. |
|
The 13th and subsequent programmes are |
|
ignored. You can manually name the |
|
registered programme numbers and select |
|
the category (see page 88). |
|
Before you start…
•Turn on your TV and set it to the video channel.
•Turn on your VCR.
1Attach the SmartFile label to the spine of the cassette as shown on the right and insert the
tape.
SMARTFILE SENSOR
2 Press SMARTFILE GENERATOR on the VCR.
A message appears indicating that the recorded programmes are being registered. The index signals are detected from the start of the tape, and the registration stops if the end of the tape is reached. The message disappears when registration is complete.
To stop registration to the SmartFile label
Press SMARTFILE GENERATOR.
SMARTFILE INDEXING IS
IN PROCESS
STARTEND
The data registered before the button is pressed remains in the SmartFile label. You can register the programmes again by pressing SMARTFILE GENERATOR.
96Registering the contents of a recorded tape in the SmartFile label