Notes
•The counter resets to “0:00:00” whenever a tape is reinserted.
•The counter stops counting when it comes to a portion with no recording.
•The time counter does not appear on the TV screen when using an
•Depending on your TV, the following may occur while playing an
–The picture becomes black and white.
–The picture shakes.
–No picture appears on the TV screen.
–Black streaks appear horizontally on the TV screen.
–The colour density increases or decreases.
•Tapes recoreded in the LP and EP mode cannot be played back on this VCR.*1
•The picture’s colour may be affected when playing a
•While setting the menu on the TV screen, buttons for playback on the remote commander do not function.
*1
Starting playback automatically with one button (One Touch Play)
If you use the SMARTLINK connection, you can turn on the VCR and the TV, set the TV to the video channel, and start playback automatically with one button.
1 Insert a tape.
The VCR automatically turns on.
If you insert a tape with its safety tab removed, the TV turns on and switches to the video channel. Playback starts automatically.
2 Press H PLAY.
The TV turns on and switches to the video channel automatically. Playback starts.
Tip
•When there already is a tape in the VCR, the VCR and the TV turn on, the TV is set to the video channel, and playback starts automatically in one sequence when you press H PLAY.
Note
• When you use the One Touch Play function, leave the TV on or in the standby mode.
Operations Basic
Playing a tape 35