Tips

•To set the programme position, you can also use the PROG +/– or programme number buttons.

•To set the programme position with a two digit number, press –/– – (ten’s digit) button followed by the programme number buttons.

•To set the line input video source, you can also use the PROG +/– buttons.

•To set the tape speed, you can also use the SP/LP button*2.

•When you are recording a programme in the SP mode and the remaining tape becomes shorter than the recording time, the tape speed is automatically changed to the LP mode. Note that some interference will appear on the picture at the point the tape speed is changed. If you want to keep the same tape speed, set AUTO LONG PLAY*2 to OFF in the OPTIONS- 1 menu (page 58).

•Even if you set TIMER OPTIONS*1 to SHOWVIEW in the OPTIONS-2 menu, you can set the timer manually. Press MENU to select TIMER, then go to step 2.

•To check, change, or cancel the programme setting, press </, to choose LIST, then press OK in step 2. For details, see step 3 in “Checking/changing/cancelling timer settings” (page 51).

Notes

•When setting the timer with VPS/PDC signals, enter the start and stop times exactly as indicated in the TV programme guide. Otherwise, the VPS/PDC function*1 won’t work.

•If the VPS/PDC signal is too weak or the broadcasting station failed to transmit VPS/PDC signals, the VCR will start recording at the set time without using the VPS/PDC function*1.

•The indicator flashes in the display window when you press ?/1 with no tape inserted.

•The station name*1 may not appear if the VCR does not receive station name information signals.

*1 SLV-SE450K only

*2 not available on SLV-SE100K/SX100K

Operations Basic

Recording TV programmes using the timer 47