Operation (when recording on this VCR)
Before you start editing | X | |
• Turn on your TV and set it to the | ||
| ||
video channel. |
| |
• Press INPUT SELECT to display |
| |
the connected line in the display |
| |
window. |
| |
• Press SP/LP to select the tape |
| |
speed, SP or LP.* | z REC |
1 Insert a source tape with its safety tab removed into the other (playback) VCR. Search for the point to start playback and set it to playback pause.
2 Insert a tape with its safety tab in place into this (recording) VCR. Search for the point to start recording and press X (pause).
3 Press z REC on this VCR to set it to recording pause.
4
To stop editing
Press the xSTOP buttons on both VCRs.
Tip
•To cut out unwanted scenes while editing, press X (pause) on this VCR when an unwanted scene begins. When it ends, press X (pause) again to resume recording.
Note
•If you start editing following the procedure above, the VCR won’t start recording with the OPC function. To record a tape with the OPC function, press z REC again during recording pause in step 3 so the VCR analyses the tape. Then, press X (pause) after the OPC indicator stops flashing to start recording. If you press X (pause) before the OPC indicator stops flashing, the OPC function is cancelled.
* not available on
Operations Additional
Editing with another VCR 61