Step 4
Tuning your TV to the unit
If you have connected your unit to the TV using the audio/video cable, skip this step.
ON/STANDBY
REC
1 ON/STANDBY Press ON/STANDBY to turn on the unit.
2
3
4
5
Turn on your TV and select a programme position for video playback.
Choose a channel between UHF 30 and 39 on the TV where there is no picture and no sound or only a steady rustling sound.
This channel will now be referred to as the video channel.
Insert a tape recorded in the colour system matching your TV into the cassette compartment.
The unit starts playing automatically if you insert a tape with its safety tab removed.
Press áPLAY on the unit.
Tune the TV until the video playback picture is clearly displayed on the TV screen.
Refer to your TV manual for tuning instructions.
You have now tuned your TV to the unit. From now on, whenever you want to play a tape, set the TV to the video channel.
If the playback picture does not appear clearly, see “To obtain a clear playback picture” on page 9.
8Getting Started