Additional Information
Troubleshooting
If you have any questions or problems not covered below, please consult your nearest Sony service facility.
| Symptom | Remedy |
|
|
|
| The ON/STANDBY switch | • Connect the mains lead securely. |
| does not function. |
|
|
|
|
| The power is turned on but the | • Moisture condensation occurs. Turn the power off, |
| unit does not operate. | unplug the mains lead and leave the unit to dry for |
|
| over an hour. |
Power
The VCR enters standby mode or turns off automatically.
•The auto safety system is triggered to protect your tape and the unit’s mechanism when there is something wrong with the tape or when the mechanism is overloaded. Press ON/STANDBY to restart the unit. If the unit does not work after pressing ON/STANDBY again, disconnect the mains lead from the mains. Wait for at least 15 seconds. Then reconnect mains, and press ON/STANDBY again. If the unit still does not work, please consult your nearest Sony service facility.
Playback
The playback picture does not | • Make sure the TV is set to the video channel. If you |
appear on the TV screen. | are using a monitor, set it to video input. |
|
|
The picture is not clear. | • Adjust the tracking with the $/4TRACKING |
| NORMAL/SLOW buttons. |
| • Make sure the COLOR SYSTEM switch is set to the |
| position corresponding to the colour system which the |
| tape was recorded with. |
| • The video heads are dirty (see the next page). Clean |
| the video heads using a video head cleaning cassette. |
| If a cleaning cassette is not available in your area, have |
| the heads cleaned at your nearest Sony service facility |
| (a standard service charge will be required). Do not |
| use a commercially available |
| cassette, as it may damage the video heads. |
| • The video heads may have to be replaced. Consult |
| your local Sony service facility for more information. |
|
|
The picture rolls vertically | • Adjust the vertical hold control on the TV or monitor. |
during picture search. |
|
|
|
The picture has no sound. | • The tape is defective. Use a new tape. |
continued
Additional Information 21