OK button
Click to confirm the settings and send the set values for the selected position to the camera.
Notes
•Unattended object detection does not operate until the status lamp turns green.
•Although the indicator quickly responds to the setting being performed as you change the size of a window or a parameter, you need to click the OK button to confirm the setting. The setting will be cancelled if you do not click the OK button.
To set the unattended object detection functionSet the unattended object detection function as follows:
1 Select Unattended object on Detection.
The setting items for unattended object detection appear.
2 Wait until the status lamp turns green.
When the status lamp is gray, the camera is in the process of acquiring a background image. Unattended object detection does not work during this period.
The status lamp turns green when the background image has been acquired.
Note
When you acquire a background image, use an image with as little motion as possible. If you use an image with a lot of motion, it will take a long time to complete acquiring of the background image.
3 Check the Window 1 check box.
The Window 1 frame appears on the monitor display.
4 Adjust the position and size of Window 1. Drag Window 1 to move it and change its size.
5 Set the active or inactive windows.
Select Active to set Window 1 as an active area, or Inactive to set it as an inactive area.
Note
If an active window and inactive window overlap, the overlapped portion will be regarded as an inactive area.
6 Set the function for Windows 2 to Windows 4.
Repeat steps 3 to 5 for each window.
7 Select the object size for Object size.
Select a larger size if a small noise may be detected as an object by mistake.
8 Check whether an unattended object is detected properly.
Place an object in the window and confirm that unattended object detection works correctly. The object regarded as an unattended object is marked with a red frame.
Note
It may take a long time until an unattended object is detected, depending on the image being shot.
9 Click OK.
The unattended object detection settings for the selected position are confirmed.
Note
Be sure to click the OK button to confirm the settings. The setting will be cancelled if you do not click the OK button.
10 Set Detection time, Alarm interval and Release time in the Unattended object setting tab.
Unattended object setting TabUse this tab to set the alarm time for unattended object detection.
Time settingUnattended object detection requires the following three kinds of time settings.
Detection time
Set the period of time from when an object enters a detection window (active window) and stops until when
Camera the Administrating
Setting the Object Detection Function — Object detection Menu | 61 |
|
|