Toshiba VF-S11 manual 4.2.7How to save/load the user setting parameters, E6581160

E6581160

4.2.6Returning all parameters to standard default setting

Setting the standard default setting parameter V[R=, all parameters can be returned to the those factory default settings.

Note: For more details on the standard default setting parameter V[R, see 5.6.

Notes on operation

• We recommend that before this operation you write down on paper the values of those parameters,

because when setting V[R=, all parameters with changed values will be returned to standard factory default setting.

• Note that HO, HOUN, H, f470-f473, H and H will not be reset to their

factory default settings. 4

QSteps for returning all parameters to standard default setting

Key operated		LED display						Operation
				Displays the operation frequency (perform during operation stopped).
				The first basic parameter “CWJ” (history function) is displayed.
	MODE	CWJ
		V[R		Press the		key or the		key to change to V[R.
				Pressing the ENTER key displays the programmed parameters.
				(V[R will always display "(zero)" on the right, the previous setting
				on the left.)
				Press the	key or the		key to change the set value.
				To return to standard factory default setting, change to "".
		KPKV		Pressing the ENTER key displays "KPKV" while returning all
				parameters to factory default setting.
				The monitor returns to the display of setup parameters.

If there is anything you do not understand during this operation, press the MODE key several times to start over from the step of CWJ display.

4.2.7How to save/load the user setting parameters

The current settings of all parameters can be stored (saved) in memory at a time by setting the standard setting mode selection parameter V[p to 7. Also, all parameter settings stored in memory can be restored (loaded) by setting parameter V[p to 8. This means that you can use this parameter (V[p=7 and 8) as the parameter for your own initial settings (default settings).

35