Toshiba VF-S11 manual 4.2.2How to set extended parameters, E6581160

E6581160

4.2.2How to set extended parameters

The VF-S11 has extended parameters to allow you to make full use of its functions.

All extended parameters are expressed with H and three digits.

Basic parameters

H

ENT

MODE

H～H

4

Press the MODE key once and use the VW key to select H from the basic parameters.

[Steps in key entry for extended parameters]

Press the V key or the W key to change the set value. Pressing the ENTER key allows the reading of parameter setting.

	: switches to the setting monitor mode.(Displays CWJ)
MODE		* See 7.3 for extended
		parameters.

:Selects "H" from basic parameters.

:The first extended parameter “HK” (Low-speed signal output frequency) is displayed.

:Selects the extended parameter whose setting needs to be changed.

:Reads the programmed parameter setting.

: Changes the parameter setting.

Saves the changed value of the extended parameter setting.

Pressing the MODE key instead of the key moves back to the previous status.

31