Toshiba VF-S11 3.1.2How to set the frequency, Hoqf=, Example of operating a run from the panel

E6581160

3.1.2How to set the frequency

[Example of a HOQF setting procedure]
Key operated		LED display			Operation
			Displays the operation frequency (operation stopped).
			(When standard monitor display selection H=[Operation
			frequency])
			Displays the first basic parameter [History (CWJ)].
	MODE	CWJ
		HOQF	Press either the	key or	key to select “HOQF”.
							3
			Press ENTER key to display the parameter setting. (Default setting: ).
			Change the parameter to  (Operation panel) by pressing the			key.
		⇔HOQF	Press the ENTER key to save the changed parameter. HOQF and the
			parameter set value are displayed alternately.

*Pressing the MODE key twice returns the display to standard monitor mode (displaying operation frequency).

(1)Setting the frequency using the potentiometer on the inverter main unit

(HOQF=)

Set the frequency with the notches on the potentiometer.

Move clockwise for the higher frequencies.

The potentiometer has hysteresis. So the set value may slightly change when the inverter is turned off, and then turned back on.

(2)Setting the frequency using the operation panel (HOQF=)

Set the frequency with the operation panel..

: Moves the frequency up : Moves the frequency down

Example of operating a run from the panel

Key operated	LED display			Operation
		Displays the operation frequency.
		(When standard monitor display selection H= [Operation
		frequency])
		Set the operation frequency.
	⇔HE	Press the ENT key to save the operation frequency. HE and the
		frequency are displayed alternately.
		Pressing the	key or the	key will change the operation frequency
		even during operation.

21